| Part No | Manufacturer | Application |
|---|
| PST591D | Mitsumi | System reset |
| PST3232 | Mitsumi | CMOS system reset |
| PST3360 | Mitsumi | CMOS system reset |
| PST596LN | Mitsumi | System reset |
| PST593DM | Mitsumi | System reset |
| MM1385RN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| MM6572S | Mitsumi | High precision operational amplifier |
| PST592J | Mitsumi | System reset |
| MM3035F | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 5.5V |
| MM3104D | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.3V |
| MM1509 | Mitsumi | Video switch75O driverY/C mix |
| MM1165JM | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM1433 | Mitsumi | IC for control of lithium ion batteries chargihg (one cell) |
| PST592KM | Mitsumi | System reset |
| MM1250XD | Mitsumi | IC bus video switch |
| PST9132 | Mitsumi | System reset |
| PST9244 | Mitsumi | System reset |
| PST575L | Mitsumi | System reset |
| PST593C | Mitsumi | System reset |
| PST7029M | Mitsumi | System reset |
| MM1354AJ | Mitsumi | Q Xpander processor |
| MM1294A | Mitsumi | Protection of lithium ion battery (four cells in series) |
| PST573D | Mitsumi | System reset |
| MM1181ZT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| MM1302EF | Mitsumi | Protection of lithium ion battery (two cell in series) |
| MM1216FN | Mitsumi | Low-saturation three-pin regulator with externally mounted power transistor |
| PST573C | Mitsumi | System reset |
| MM1385LN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| MM3094D | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.3V |
| MM1320SN | Mitsumi | Microminiature low-noise, low-saturation three-pin regulator |
