| Part No | Manufacturer | Application |
|---|
| PST594IM | Mitsumi | System reset |
| MM3032C | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 2.2V |
| MM3034E | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 4.4V |
| MM1292DF | Mitsumi | Protection of lithium ion battery (two cells in series) |
| PST575CM | Mitsumi | System reset |
| MM1373E | Mitsumi | Detection of lithium ion battery overcharging |
| MM1226XF | Mitsumi | 2-input 1-output video switch |
| PST574KM | Mitsumi | System reset |
| PST3351 | Mitsumi | CMOS system reset |
| MM3034A | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 4.0V |
| MM1124CF | Mitsumi | Bass amplifier |
| PST7042M | Mitsumi | System reset |
| MM1093PD | Mitsumi | 4fsc clock generator |
| PST7026M | Mitsumi | System reset |
| MM1301HW | Mitsumi | Protection of lithium ion battery (four cells in series) |
| MM3092B | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.1V |
| PST592DM | Mitsumi | System reset |
| MM1332FF | Mitsumi | Control of lithium ion battery chargihg |
| MM1006XF | Mitsumi | Power amp for headphone stereos |
| PST597DN | Mitsumi | System reset |
| PST3431 | Mitsumi | CMOS system reset |
| MM1380 | Mitsumi | Sense current amplifier |
| PST9122N | Mitsumi | System reset |
| MM1332EF | Mitsumi | Control of lithium ion battery chargihg |
| MM1181JM | Mitsumi | Low-noise, low-saturation three-pin regulator |
| MM1104AF | Mitsumi | IC for headphone stereos |
| MM3033D | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 3.3V |
| MM1592B | Mitsumi | Low-saturation 300mA regulators 2.1V |
| MM1165FM | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM1301FW | Mitsumi | Protection of lithium ion battery (four cells in series) |
