| Part No | Manufacturer | Application |
|---|
| MM1332AF | Mitsumi | Control of lithium ion battery chargihg |
| MM1181IT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| MM3031J | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 1.800V |
| MM1373A | Mitsumi | Detection of lithium ion battery overcharging |
| PST593F | Mitsumi | System reset |
| MM1320RN | Mitsumi | Microminiature low-noise, low-saturation three-pin regulator |
| PST573LM | Mitsumi | System reset |
| MM3034K | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 4.9V |
| MM1292JF | Mitsumi | Protection of lithium ion battery (two cells in series) |
| PST3447 | Mitsumi | CMOS system reset |
| MM1096BD | Mitsumi | System reset (with built-in watchdog timer) |
| MM3094A | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.0V |
| PST591DM | Mitsumi | System reset |
| PST9235 | Mitsumi | System reset |
| MM1469XH | Mitsumi | 4-ch BTL motor driver for CD players |
| MM1508 | Mitsumi | Video switch75O driverY/C mix |
| PST9141N | Mitsumi | System reset |
| PST9133 | Mitsumi | System reset |
| MM1332DF | Mitsumi | Control of lithium ion battery chargihg |
| PST7023M | Mitsumi | System reset |
| PST3329 | Mitsumi | CMOS system reset |
| MM1592E | Mitsumi | Low-saturation 300mA regulators 2.4V |
| PST9142 | Mitsumi | System reset |
| MM1065JM | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM1385DN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| MM3102A | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.0V |
| PST623XS | Mitsumi | System reset |
| MM1111XF | Mitsumi | 2-input 1-output video switch |
| PST3430 | Mitsumi | CMOS system reset |
| MM3032F | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 2.5V |
