| Part No | Manufacturer | Application |
|---|
| PST592IM | Mitsumi | System reset |
| MM1301BW | Mitsumi | Protection of lithium ion battery (four cells in series) |
| PST574IM | Mitsumi | System reset |
| MM6558F | Mitsumi | High precision operational amplifier |
| PST597LN | Mitsumi | System reset |
| PST591GM | Mitsumi | System reset |
| PST3435 | Mitsumi | CMOS system reset |
| MM1104BF | Mitsumi | IC for headphone stereos |
| PST3423 | Mitsumi | CMOS system reset |
| MM3103F | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.5V |
| MM3032B | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 2.1V |
| MM1594B | Mitsumi | Low-saturation 300mA regulators 4.1V |
| MM1095AS | Mitsumi | System reset (with built-in watchdog timer) |
| MM1507 | Mitsumi | Video switch75O driverY/C mix |
| MM3093F | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.5V |
| MM3104C | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.2V |
| MM1320GN | Mitsumi | Microminiature low-noise, low-saturation three-pin regulator |
| PST600JM | Mitsumi | System reset |
| MM3104F | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.5V |
| PST573JM | Mitsumi | System reset |
| PST3451 | Mitsumi | CMOS system reset |
| MM1373A | Mitsumi | Detection of lithium ion battery overcharging |
| PST598KN | Mitsumi | System reset |
| MM1165HT | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM6561D | Mitsumi | High precision operational amplifier |
| PST9320U | Mitsumi | System reset |
| MM1124AF | Mitsumi | Bass amplifier |
| MM1331E | Mitsumi | Step-up DC/DC coverter(VFF) |
| MM1065ZT | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| MM3032J | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 2.8V |
