| Part No | Manufacturer | Application |
|---|
| PST3449 | Mitsumi | CMOS system reset |
| MM1181ZM | Mitsumi | Low-noise, low-saturation three-pin regulator |
| PST7039M | Mitsumi | System reset |
| MM1034XD | Mitsumi | HBS-compaqtible driver and receiver with power supply |
| PST9236 | Mitsumi | System reset |
| MM1174 | Mitsumi | System reset (with battery back-up) |
| MM1114XS | Mitsumi | 3-input 1-output video switch |
| MM3101J | Mitsumi | Low-ripple, low-saturation CMOS regulators, 1.8V |
| MM1309CF | Mitsumi | Protection of lithium ion battery (three cells in series) |
| MM1180GT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| PST9337U | Mitsumi | System reset |
| MM1454 | Mitsumi | Q surround processor |
| MM1593E | Mitsumi | Low-saturation 300mA regulators 3.4V |
| MM1021XS | Mitsumi | Sync detector |
| MM3093K | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.9V |
| MM1234 | Mitsumi | 2-input 1-output 3-circuit video switch |
| MM1313AD | Mitsumi | IC BUS control 5-input 2-output AV switch |
| MM1385CN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| MM1257ET | Mitsumi | High-precision three-pin regulator |
| MM3092A | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.0V |
| PST9015N | Mitsumi | System reset |
| PST573F | Mitsumi | System reset |
| PST9013N | Mitsumi | System reset |
| PST9134 | Mitsumi | System reset |
| MM1320UN | Mitsumi | Microminiature low-noise, low-saturation three-pin regulator |
| MM1233 | Mitsumi | 2-input 1-output 3-circuit video switch |
| MM1124BF | Mitsumi | Bass amplifier |
| MM1096BF | Mitsumi | System reset (with built-in watchdog timer) |
| MM1305BW | Mitsumi | Remaining battery power display |
| PST9128N | Mitsumi | System reset |
