| Part No | Manufacturer | Application |
|---|
| HEF4511BP | PHILIPS | BCD to 7-segment latch/decoder/driver |
| 1N4001G | PHILIPS | Rectifier. Repetitive peak reverse voltage 50 V. |
| TDA1387T/N1 | PHILIPS | Stereo Continuous Calibration DAC (CC-DAC) |
| BC618 | PHILIPS | NPN Darlington transistor. |
| BZD27-C43 | PHILIPS | Voltage regulator diode. Working voltage (nom) 43 V. Reverse breakdown voltage (min) 40 V. |
| PBYR1540CTB | PHILIPS | Rectifier diodes Schottky barrier |
| 74HCT573D | PHILIPS | Octal D-type transparent latch; 3-state |
| N74F259D | PHILIPS | Latch |
| BUW12AF | PHILIPS | 1000 V, silicon diffused power transistor |
| TDA3827 | PHILIPS | TV-sound demodulator circuit |
| PCD3310AT | PHILIPS | 6 V, pulse and DTMF dialler with redial |
| PCD8582D-2T | PHILIPS | 256 x 8-bit CMOS EEPROMs with I2C-bus interface |
| 74HCT30U | PHILIPS | 8-input NAND gate |
| 2PB1219AS | PHILIPS | PNP general purpose transistor |
| PBYR740B | PHILIPS | Rectifier diode. Schottky barrier. |
| PSMA20A | PHILIPS | Transient voltage suppressor diode. Reverse stand-off voltage 20 V. |
| BZW03-C360 | PHILIPS | Voltage regulator diodes |
| PCF1252-8T | PHILIPS | Threshold detector and reset generator |
| TDA8540 | PHILIPS | 4 x 4 video switch matrix |
| BZV85-C10 | PHILIPS | Voltage regulator diode. Working voltage Vz(min) = 9.4 V, Vz(max) = 10.6 V at Iztest. Test current Iztest = 25 mA. |
| 74ACT11378N | PHILIPS | 5 V, hex D-type flip-flop with enable, positive-edge trigger |
| PHP30NQ15T | PHILIPS | N-channel TrenchMOS transistor |
| P83C652EFPN | PHILIPS | 16 MHz, CMOS single-chip 8-bit microcontroller |
| BZV49-C75 | PHILIPS | Voltage regulator diode. |
| TEA1097TV | PHILIPS | Speech and loudspeaker amplifier IC with auxiliary inputs/outputs and analog multiplexer. |
| PHN110 | PHILIPS | N-channel enhancement mode MOS transistor |
| HEF4078BU | PHILIPS | 8-input NOR gate |
| BYV143X-40 | PHILIPS | 40 V, schottky barrier rectifier diode |
| TDA1519/N2 | PHILIPS | 2 x 6 W stereo car radio power amplifier |
| BZV85-C51 | PHILIPS | Voltage regulator diode. Working voltage Vz(min) = 48.0 V, Vz(max) = 54.0 V at Iztest. Test current Iztest = 4 mA. |
