| Part No | Manufacturer | Application |
|---|
| MAX4275AHEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 2.5, 1+ (Rf/Dg) noninverting gain 3.5, -3dB BW 820kHz. |
| MAX6250AEPA | MaximIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 3.0. |
| MAX6346XR37-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.700V. Order increment 10k |
| MAX520ACWE | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 1. |
| MAX408ACSA | MaximIC | Single high-speed, fast-settling, high output current operational amplifier |
| MAX6317HUK32AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6306UK33D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.218(min),3.383(max) Nominal timeout period 1ms. |
| MAX6322HPUK31B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 20ms |
| MAX5354CPA | MaximIC | 10-bit voltage-output DAC. +5V single supply operation. |
| MAX762EPA | MaximIC | 15V or adjustable, high-efficiency, low Iq, step-up DC-DC converter. |
| MX536AJC/D | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX2740ECM | MaximIC | Integrated GPS receiver and synthesizer |
| MAX7233BFIPL | MaximIC | Triplexed LCD decoder/driver (4 alphanumeric characters/18 segments; parallel input format). |
| MAX806SC/D | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| DG302ACWE | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX6325CPA | MaximIC | Low-noise, +2.5V voltage reference. Max tempco 1ppm/c |
| MAX6379XR40-T | MaximIC | Ultra-low-power voltage detector, 4.0V |
| DG508AAK | MaximIC | Monolithic CMOS analog multiplexer. Single 8-channel (1-of-8). |
| MAX802TCPA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX1125AIDO | MaximIC | 8-bit,300 Msps flash ADC |
| MAX4526EUA | MaximIC | Phase-reversal analog switch. |
| MAX704SESA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6312UK46D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.514(min) 4.746(max). Nominal timeout period 140ms. |
| MAX18BACNG | MaximIC | High-speed 12-bit A/D converter with external reference input. 3 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX6318MHUK28AY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX4193CJA | MaximIC | CMOS micropower step-up switching regulator |
| MAX820LMJE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.62V. Reset and low-line threshold accuracy +-2% |
| MAX860C/D | MaximIC | 50mA, Frequency-selectable, switched-capacitor voltage coverter. Input voltage +1.5V to 5.5V, 200microA quiescent current. |
| MX7575AQ | MaximIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1 LSB. |
| MAX6317HUK37CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
