| Part No | Manufacturer | Application |
|---|
| MAX6307UK38D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.705(min),3.895(max).Nominal timeout period 1ms. |
| MAX6316MUK28AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1ms, typ watchdog timeout 102ms |
| SI7661DJ | MaximIC | CMOS voltage converter |
| MAX6318LHUK25BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX808MMJA | MaximIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. CMOS RAM write protection.. |
| MAX448ACPD | MaximIC | Quad high-speed, fast-settling, high output current operational amplifier |
| DG408C/D | MaximIC | Improved, 8-channel CMOS analog multiplexer |
| MAX457C/D | MaximIC | Dual CMOS video amplifier. |
| MAX206ENG | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| OP37BZ | MaximIC | Low-noise precision operational amplifier. 63MHz gain-bandwidth product. 17V/micros slew rate. |
| OP37GZ | MaximIC | Low-noise precision operational amplifier. 63MHz gain-bandwidth product. 17V/micros slew rate. |
| MAX6307UK45D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.388(min),4.613(max).Nominal timeout period 1ms. |
| MAX6316MUK45DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6501CMP035-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +35. |
| MAX804RCSA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX4199ESA | MaximIC | Micropower, +2.7V to +7.0V single-supple operation, Rail-to-Rail, precision differential amplifier. Gain +10V/V. |
| MAX6318MHUK30AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX4075ABEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 0.25V/V, noninverting gain 1.25V/V, -3dB BW 200kHZ. |
| MAX6318MHUK46DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6306UK49D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.778(min),5.023(max) Nominal timeout period 20ms. |
| MAX7705CSA | MaximIC | Microprocessor power-supply monitor with reset |
| MAX4562EEE | MaximIC | Serially controlled, clickless audio/video switch. 2-wire IIC-compatible. |
| MAX675MJA | MaximIC | +5V precision voltage reference. Temp. coefficient 20ppm/degC, Initial error 7mV. |
| MAX172BMRG | MaximIC | Complete 10 microsec. CMOS 12-bit ADC. Error +- 1 LSB. |
| MAX5839BEMN | MaximIC | Octal, 13-bit voltage-output DAC with parallel interface. INL(LSB) +-4 |
| MAX633BEPA | MaximIC | CMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MXD1005C/D200 | MaximIC | 5-tap silicon delay line |
| DG384ABWE | MaximIC | General purpose CMOS quad analog switch. |
| MAX6317HUK33DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX4613EPE | MaximIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
