| Part No | Manufacturer | Application |
|---|
| IH5352C/D | MAXIMIC | Quad RF and video switch |
| MAX3232CPE | MAXIMIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| MAX4075ANEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 8V/V, noninverting gain 9V/V, -3dB BW 50kHZ. |
| MAX6314US32D3-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.20V. Reset timeout period(min) 140ms. |
| MAX6315US28D4-T | MAXIMIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.80V. Reset timeout period(min) 1120ms. |
| DG305ACK | MAXIMIC | CMOS dual and quad analog switch. |
| MAX4539EWP | MAXIMIC | Low-voltage, single 8-to-1 calibration multiolexer. |
| MAX637BEJA | MAXIMIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX505ACNG | MAXIMIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-1 LSB. |
| MX7248JP | MAXIMIC | Complete, 12-bit voltage-output DAC. |
| OP07EJ | MAXIMIC | Low offset voltage operational amplifier. |
| MAX713EPE | MAXIMIC | NiCd/NiMH battery fast-charge controller (negative voltage-slope detection scheme). |
| MAX6314US33D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 20ms. |
| MAX4274BCESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 15, 1+ (Rf/Dg) noninverting gain 16, -3dB BW 390kHz. |
| MX7542KCWE | MAXIMIC | CMOS microprocessor-compatible 12 bit DAC. Error +1/2 LSB. |
| MAX428CPA | MAXIMIC | Dual high-speed, fast-settling, high output current operational amplifier |
| MAX9040AEUK-T | MAXIMIC | Micropower, single-supply operation +2.5V to 5.5V, single comparator + precision reference IC. |
| DG303CJ | MAXIMIC | Dual, TTL compatible CMOS analog switch. |
| MAX6321HPUK32CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX801LCPA | MAXIMIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.675V. Watchdog. |
| MAX1714AEEP | MAXIMIC | High-speed step-down controller for notebook computers. |
| MAX6320PUK39CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX7410CUA | MAXIMIC | 5th-order, lowpass, switched-capacitor filter. Filter response butterworth, operating voltage +5V |
| ICL7614DC/D | MAXIMIC | Single operational amplifier, 15mV |
| MAX6317HUK32BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MX7521SQ | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.2% |
| MX566AJD | MAXIMIC | High speed 12-bit monolithic D/A converter. Error +-1/2LSB |
| MAX4017EUA | MAXIMIC | Low-cost, high-speed, single-supply, gain of +2 buffer. |
| IH5047CWE | MAXIMIC | General-purpose CMOS analog switch. Quad pole, single throw (4PST) |
| MAX4525CUB | MAXIMIC | Low-voltage, single-supply multiplexer and switch. |
