| Part No | Manufacturer | Application |
|---|
| AT24C08-10PC-2.7 | Atmel | 2-wire serial EEPROM 8K(1024 x 8) |
| AT24C02-10SC | Atmel | 2-wire serial EEPROM 2K(256 x 8) |
| T89C51RD2-SMSI-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT90LS2333-4AC | Atmel | Microcontroller, in-system programmable flash=2K, EEPROM=128B, SRAM=128B, voltage range=2.7V - 6.0V, 4 MHz |
| AT27BV400-15RI | Atmel | 4-Megabit (256K x 16 or 512K x 8) unregulated Battery-Volotage high speed OTP EPROM 10mA active, 0.02mA standby |
| AT25128C1-10CI-2.7 | Atmel | SPI serial EEPROM 128K (16,384 x 8),2100kHz |
| AT28HC256F-90LM/883 | Atmel | 256 (32K x 8) high speed parallel EEPROM, 90ns |
| AT27BV4096-12VC | Atmel | 4 Megabit(256K x 16) unregulated battery-voltage high speed OTP CMOS EPROM, 8mA active, 0.02mA standby |
| TS68020DESC03YC | Atmel | HCMOS 32-bit virtual memory microprocessor, 20MHz |
| AT24C08A-10PI-1.8 | Atmel | 2-Wire serial EEPROM, 100kHz, 1.8V to 5.5V |
| AT49F002T-70JC | Atmel | 2-Megabit(256K x 8) 5-volt only CMOS flash memory, 50mA active, 0.1mA standby |
| AT27C010L-70TC | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,25mA max |
| T89C51RD2-RLVI-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT25128T1-10TC | Atmel | SPI serial EEPROM 128K (16,384 x 8),3000kHz |
| AT49LV080T-15TI | Atmel | 8-Megabit (1M x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT27C020-15PI | Atmel | 2-Megabit (256K x 8)OTP EPROM,25mA active current 0.1mA standby current |
| ATF22V10CZ-15XI | Atmel | High-performance EE PLD, 15ns |
| AT25640T1-10TI-1.8 | Atmel | SPI serial EEPROM, 64K (8192 x 8), 500kHz, 1.8V to 3.6V |
| AT49LV001NT-70PC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 3.0V to 3.6V |
| AT28HC256E-90FM/883 | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT49F4096AT-90TI | Atmel | 4-Megabit (256K x 16) CMOS flash memory, 50mA active, 0.3mA standby |
| AT25640T2-10TI | Atmel | SPI serial EEPROM, 64K (8192 x 8), 2100kHz, 4.5V to 5.5V |
| AT49BV020-12JC | Atmel | 2-Megabit (256K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| ATF22V10BQ-15XC | Atmel | High-performance EE PLD |
| 5962-8863402ZX | Atmel | 256 (32K x 8) high speed parallel EEPROM, 120ns |
| AT27C400-12TC | Atmel | 4-Megabit (256K x 16 or 512K x 8 ) OTP EPROM, 40mA active, 0.1mA standby |
| ATV750B-10JI | Atmel | High-speed UV-erasable programmable logic device,83MHz |
| AT28C010-20JC | Atmel | 1 Megabit (128K x 8) paged CMOS EEPROM |
| AT49F001T-70TC | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT6002LV-4AC | Atmel | Coprocessor field programmable gate arrays, 3.3V |
