Path: okDatasheet > Semiconductor Datasheet > Mitel Datasheet > Mitel-27
8977AP 8C443 8C449 SL1710 MT89790BN SP8916 MT8924AS MT90840AP PDSP16488ACBR VP2611 MH89791 1A194 SP8902KG MT8963AS MT88L89AP MT8971BE 2B455 PDSP16510AMAGCPR SL1711B MT8888CC/CC-1 MH88422-3 MT8808AP MH88620IN MT9300AL MT89760BN MT8941AP MT8889CC VP5513A
Part No | Manufacturer | Application |
---|---|---|
1A444 | Mitel | 1.5V; 35mW; 840mm VCSEL laser diode; for datacom, general purpose |
MEB90812A-P | Mitel | Evaluation kit |
MT8977AP | Mitel | 0.3-7.0V; 40mA; T1/ESF framer circuit. For DS1/ESF digital trunk interfaces, computer to PBX interfaces (DMI and CPI), high speed computer to computer data links |
8C443 | Mitel | Max=6.0V; 1300/1550mm PIN/Preamp; for datacom, telecom |
8C449 | Mitel | Max=6.0V; 850mm PIN/Preamp; for datacom, general purpose, analog applications |
SL1710 | Mitel | 0.3-7.0V; quadrature downconverter. For cellular telephone, cordless telephone, mobile radio |
MT89790BN | Mitel | 0.3-7.0V; 40mA; CEPT PCM 30/CRC-4 framer & interface circuit. For primary rate ISDN network nodes, multiplexing equipment, private network PBX to PBX links |
SP8916 | Mitel | 6-5V; 5GHz +16fixed modulus divider |
MT8924AS | Mitel | PCM conference circuit (PCC). Applications digital PBX/KTS, conference bridges and digital C.O. switches. |
MT90840AP | Mitel | Distributed hyperchannel switch |
PDSP16488ACBR | Mitel | 5.0V; 20MHz; single chip 2D convolver with integral line delays |
VP2611 | Mitel | 0.5-7.0V; 18mA H.261 encoder |
MH89791 | Mitel | CEPT PCM 30 transmit equalizer |
1A194 | Mitel | 1.5V; 160mW; 860mm high-performance LED, for datacom, general purpose |
SP8902KG | Mitel | 6-5V; 5GHz +2fixed modulus divider |
MT8963AS | Mitel | 0.3-6.0V; 20mA; integrated PCM filter codec. For ST-BUS compatible, transmit/receive filters & PCM codec in one I.C. |
MT88L89AP | Mitel | 3 volt integrated DTMF transceiver with power down and adaptive micro interface. Applications paging systems, repeater systems/mobile radio, credit card systems, interconnect dialers and personal computers. |
MT8971BE | Mitel | Digital subscriber interface circuit for digital subscriber lines, high speed data transmission over twisted wires, digital PABX line cards and telephone sets, 80 or 160 kbit/s single chip modems. |
2B455 | Mitel | 1.5V; 35mW; 840mm VCSEL laser diode; for datacom |
PDSP16510AMAGCPR | Mitel | 0.3-7.0V; 18mA; stand alone FFT processor |
SL1711B | Mitel | 4.75-5.25V; 109mA; quadrature downconverter for satellite receiver systems |
MT8888CC/CC-1 | Mitel | 6V; 10mA; integrated DTMF transceiver with intel micro interface. For paging systems, repeater systems/mobile radio, credit card systems, personal computers, interconnect dialers |
MH88422-3 | Mitel | 6V; 90mA;line interface circuit. For DAA, modem, fax, answering machine, terminal equipment |
MT8808AP | Mitel | 4.5-13.2V; 15mA; 8 x 8 analog switch array. For key systems, PABX and key systems, mobile radio, test equipment/instrumentation, analog/digital multiplexers, audio/video switching |
MH88620IN | Mitel | 0.3-15V; C.O. SLIC. For on/off-premise PBX line cards, central office line cards |
MT9300AL | Mitel | 0.3-5.0V; 20mA; milti-channel voice echo canceller. For voice over IP network gateways; voice over ATM,frame array |
MT89760BN | Mitel | 0.3-7.0V; 40mA; T1/ESF framer & interface circuit. For DS1/ESF digital trunk interfaces |
MT8941AP | Mitel | 0.3-7.0V; 10mA; subscriber network interface cicuit. For synchronization and timing control for T1 and CEPT digital trunk transmission links, ST-BUS clock and frame pulse source |
MT8889CC | Mitel | Integrated DTMF transiver with Adaptive micro interface. Applications credit card systems, paging systems, repeater systems/mobile radio, interconnect dialers and personal computers. |
VP5513A | Mitel | 4.75-5.25V; NTSC/PAL digital video encoder |