| Part No | Manufacturer | Application |
|---|
| AT90S2313-4PI | ATMEL | 4MHz, 8-bit AVR microcontroller with 2 Kbytes of in-system programmable flash |
| AT49LV001N-70VI | ATMEL | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 3.0V to 3.6V |
| AT27C800-12DC | ATMEL | 8-Megabit (512K x 16 or 1024K x 8) UV erasable EPROM, 50mA active, 0.1mA standby |
| ATF22V10B-10SI | ATMEL | High-performance EE PLD |
| AT89C1051-12PC | ATMEL | 8-bit microcontroller with 1Kbyte flash, 2.7V to 6.0V |
| T89C51RD2-SLUC-M | ATMEL | 0 to 40 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT93C46B-10SI | ATMEL | 3-wire serial EEPROM 1K(64 x 16), 2000kHz |
| AT27BV040-12TC | ATMEL | 4 Megabit (512K x 8) unregulated battery-voltage OTP CMOS EPROM |
| AT49BV512-15VI | ATMEL | 512K (64K x 8) single 2.7-volt Battery-Voltage flash memory, 25mA active, 0.05mA standby |
| AT49BV001-90TI | ATMEL | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 2.7V to 3.6V |
| AT90LS4434-4AC | ATMEL | 8-Bit microcontroller with 4K bytes in-system programmable flash, 2.7-6.0V pover supply, 4MHz speed |
| AT49BV001-90TC | ATMEL | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| AT27BV512-12RC | ATMEL | 512K (64K x 8) unregulated battery-voltage high speed OTP CMOS EPROM, 8ma active current, 0.02mA standby current |
| AT87F52-16JC | ATMEL | 8-bit microcontroller with 8K bytes QuickFlash, 5V power supply |
| AT89S8252-16JA | ATMEL | 8-bit microcontroller wiet 8K bytes flash,16MHz,4.0V to 6.0V |
| AT27C040-90PC | ATMEL | 4-Megabit (512K x 8)OTP EPROM |
| AT28LV256-20PC | ATMEL | 256K(32K x 8) low voltage CMOS EEPROM |
| 5962-9154507MQA | ATMEL | High-speed high-density UV erasable programmable logic device |
| AT45DB080-TI | ATMEL | 8-Megabit 2.7-volt only sequential access para]lel I/O DataFlash, 10mA active, 0.01mA standby |
| AT49LV002T-12VI | ATMEL | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT93C46A-10SC-2.5 | ATMEL | 3-wire serial EEPROM 1K(64 x 16) |
| AT49F001NT-55TC | ATMEL | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT24C08-10PI-1.8 | ATMEL | 2-wire serial EEPROM 8K(1024 x 8) |
| AT49BV001N-90TC | ATMEL | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| ATF1500ABV-12JC | ATMEL | High-performance EE PLD, 62.5 MHz |
| AT59C13W-10SI-2.5 | ATMEL | 4-wire serial EEPROM 4K(512 x 8 or 256 x 16) |
| AT25128T1-10TC-1.8 | ATMEL | SPI serial EEPROM 128K (16,384 x 8),500kHz |
| AT49BV8192T-12TC | ATMEL | 8-Megabit (512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT28C040-20FI | ATMEL | 4-Megabit (512K x 8) paged EEPROM, 80mA activ current, 3mA standby current |
| AT25HP256W-10SI-2.7 | ATMEL | SPI serial EEPROM 256K(32,768 x 8), fmax 5000 kHz, twc(max) 5ms |
