| Part No | Manufacturer | Application |
|---|
| AT49LV040-20JI | ATMEL | 2-Megabit (512K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT25160N-10SI-1.8 | ATMEL | SPI serial EEPROM, 16K (2048 x 8), 500kHz, 1.8V to 3.6V |
| AT17C010A-10JC | ATMEL | FPGA serial configuration memory, 5V |
| AT29C010A-15TC | ATMEL | 1 Megabit (128K x 8) 5-volt only CMOS flash memory |
| AT49F002NT-12PC | ATMEL | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT27BV256-90JI | ATMEL | 256K (512K x 16) unregulated battery-voltage high speed OTP CMOS EPROM, 8ma active current, 0.02mA standby current |
| AT25128N-10SC-2.7 | ATMEL | SPI serial EEPROM 128K (16,384 x 8),2100kHz |
| ATF22V10CQZ-20JC | ATMEL | High-performance EE PLD, 20ns |
| AT29LV010A-15TC | ATMEL | 1 Megabit(128 x 8) 3-volt only CMOS flash |
| AT28C040-20BISL703 | ATMEL | 4-Megabit (512K x 8) paged EEPROM, 80mA activ current, 3mA standby current, operation read |
| T89C51RD2-RLRI-L | ATMEL | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT49BV1604-12TI | ATMEL | 16-Megabit(1M x 16 or 2M x 8) 3-volt only flash memory, 25mA active, 0.01mA standby |
| AT25256-10CI | ATMEL | SPI serial EEPROM 256K (32,768 x 8),3000kHz |
| AT24C02A-10SI | ATMEL | 2-Wire serial EEPROM, 400kHz, 4.5V to 5.5V |
| AT28HC256-12TI | ATMEL | 256(32K x 8) high speed CMOS EPROM |
| ATMEGA103-6AI | ATMEL | 8-bit microcontroller with 128K bytes in-system programmable flash, 4.0-5.5V power supply |
| AT29BV040A-25TC | ATMEL | 4 Megabit (512K x 8) single 2.7-volt battery-voltage CMOS flash memory |
| AT45D011-XI | ATMEL | 1-Megabit 5.0-volt only serial DataFlash, 25mA active, 0.02mA standby, fsck 15MHz |
| AT87F52-20AI | ATMEL | 8-bit microcontroller with 8K bytes QuickFlash, 5V power supply |
| AT27C512R-55RC | ATMEL | 512K (64K x 8) OTP CMOS EPROM |
| AT49F8192T-90RI | ATMEL | 8-Megabit (512K x 16) 5-volt ohly CMOS flash memory, 50mA active current, 0.3mA standby current |
| AT49LV002-12PC | ATMEL | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| AT27LV256A-15RC | ATMEL | 256K(32K x 8) low voltage OTP CMOS EPROM |
| AT49F010-90PC | ATMEL | 1-Megabit (128K x 8) 5-volt only CMOS flash memory, 90ns |
| ATV2500B-15JI | ATMEL | High-speed high-density UV erasable programmable logic device |
| AT89C1051U-12PA | ATMEL | 8-bit microcontroller with 1K bytes flash, 2.7V to 6.0V power supply |
| AT89C55-24QC | ATMEL | 8-Bit microcontroller with 20K bytes flash,5V power supply |
| AT24C32-10SI-1.8 | ATMEL | 2-wire serial EEPROM 32K(4096 x 8),100kHz |
| AT93C66-10TC-2.5 | ATMEL | 3-wire serial EEPROM, 500KHz, 2.5V to 5.5V |
| AT49LV040-20TI | ATMEL | 2-Megabit (512K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
